This project is a unique 3D printed decorative night lamp inspired by stained glass art, combined with UV resin panels and a realistic flickering flame LED.
The goal of this design was to create a warm, ambient light with a natural flame effect while keeping the structure simple and easy to build.
⸻
🎨 Resin Panels
The panels are made by filling the 3D printed parts with UV resin to achieve a smooth, glass-like transparent finish.
For best results:
• Use low-viscosity UV resin
• Remove air bubbles before curing
• Cure evenly under UV light
⸻
🔧 Electronics
The lamp uses a simple and reliable circuit with touch control:
• TTP223 Touch Sensor (ON/OFF)
https://s.click.aliexpress.com/e/_c4erDduJ
https://s.click.aliexpress.com/e/_c4N58APv
• 2N2222 Transistor
https://s.click.aliexpress.com/e/_c32PaP8R
https://s.click.aliexpress.com/e/_c3c5xZ6x
• 1kΩ Resistor
https://s.click.aliexpress.com/e/_c3dwEr6x
https://s.click.aliexpress.com/e/_c3qxyUNl
• Flame LED (3V–5V flickering type)
https://s.click.aliexpress.com/e/_c3OXhwAR
• Battery holder (3× AA)
https://s.click.aliexpress.com/e/_c30Dkph1
https://s.click.aliexpress.com/e/_c3T0zTt1
• Wires (AWG24)
https://s.click.aliexpress.com/e/_c2yCSOYL
https://s.click.aliexpress.com/e/_c4TJLWOP
⸻
🧩 Assembly
The assembly process is modular and beginner-friendly.
Build steps shown in the video:
- Fill the printed parts with UV resin
- Wire the circuit and connect the touch module
- Assemble all components inside the case
- Final assembly of the lamp
- 3D printing timelapse shown at the end
⸻
✨ Features
• Realistic flame LED effect 🔥
• Soft warm ambient light
• Touch ON/OFF control
• Stained glass style panels
• Modular and customizable design
⸻
The 3D printing files are available on MakerWorld — you can download them using the link below.
https://makerworld.com/models/2756253?appSharePlatform=copy
⸻
🔥 Designed for makers, DIY lovers, and anyone who enjoys combining electronics with 3D printing.
